Recent content by Lloyd Quick

Great! Lloyd

I am pleased you kept at it until it worked. How many tries did it take? Lloyd

When the calibration fails the quadcopter is useless and the error code keeps repeating. The only way to fix it, is to do a successful calibration. Lloyd

Two brief flashes, pause for ~700ms, longer flash means calibration failed. Go to You Tube and search for "global drone x183 calibration". Look at 4 or 5 Videos and try calibration their way. It took me about 5 tries to get it to work. Let me know how it works for you. Lloyd

I went on u tube and watched many videos of calibration, and tried each one, many times before I was successfully. Please keep trying. Lloyd

That looks great! Lloyd

You need at least 7.0 volts under power at the rx to fly. With the original battery I got 3 minuets of flight. I now use a 2200 mah 60C battery and get 10 minuets flight. Finding a battery with the proper connector is difficult. I changed the connector on this battery...

I am pleased you got it to fly. Lloyd

Let me know when you get your new transmitter how it works. Lloyd

One long and 2 short flashes means your calibration attempt failed. Please recalibrate again. I suggest watching the video on u-tube.

The lower buttons are only functional on the follower models with dual GPS. my first 183 did not have functional buttons, but flew well.

Did the lights stop blinking after 5 minuets from turning it on? If not try calibration again it took me about 6 tries to get it right . I watched the video many times, and paused it many times. Good luck on your next calibration.

I followed this video carefully and now all is well: https://ruclip.com/video/zgH2BAkKkDM/global-drone-x183-calibration.html

I found this: https://www.amazon.com/Qiyun-Helicopter-Configuration-Quadcopter-Accessories/dp/B07BJZXFHJ?SubscriptionId=AKIAJA54JMESX73IGPXQ&amp=&ascsubtag=306059626-16-1034396188.1521148224&camp=2025&creative=165953&creativeASIN=B07BJZXFHJ&linkCode=xm2&psc=1&tag=d_2b_a_p-20 Do you know of any...

I have the Global Drone 183 follower that flew fine before I calibrated it. After calibration the lights blink continually one long 2 short, but won't acquire any sats. Motors idle but won't rev up to take off. How do we reset the quad?