Search results

Also in cc3d hardware screen, you need to configure the main port to sbus, its in a drop down menu. When you select the the ppm, pwm seťtings, choose "futaba sbus"

I have the same setup at home and it took me a while, you can use the s.bus which is only 3 wires. You need one of the cc3d micro connectors, plug the micro plug into the "main port" of the cc3d, then the red, black and blue go into the sbus port "bottom" right of the x8r. It will have a...

Yes i can help you

Thanks for the help, i will record a video and send it through. Also this might be a point of note, when i have the motors spinning up, they make a "tapping sound" every so often?

Well its not so much the beginner stage i considered, I bought the Taranis because i was looking foward to the future and its something ill grow into. The transmitter is a big investment for me, so i wanted to get something that lasts, has very little additional expenses, and had heaps of...

Hi GJH, Yes, i did, i unplugged all the escs and checked this. Do you think it maybe a bad batch of escs or a bad esc?

Hi Community, I have been building my first quad, and when I have gone to test it, it flips on takeoff. I have the below specs: openpilot cc3d 4 x DYS 2830-14 750kv 4 x 14x4.7 props (cw & ccw) Hobbypower simonk 30a esc w/ bec 490mhz Turnigy 30-40c 1000mah 4.s (testing battery) frsky x8r...

Have you tried a Frsky Taranis? I am new to the scene and its been easy to pick up and configure...

Why dont you just upgrade to the aluminium T Joint? Tarot Φ16 metal tripod T-Block TL68B45 Tarot-rc.com

Try going into your Taranis receiver and make sure you have programmed the channels i.e. throttle etc so it matches the channels in clean flight. On the Taranis, scroll through to page 6 on the menu, this is where you assign the channels Also checked to make sure your quad is armed. Just be...

Hi Community, I have been building my first quad, and when I have gone to test it, it flips on takeoff. I have the below specs: openpilot cc3d 4 x DYS 2830-14 750kv 4 x 14x4.7 props (cw & ccw) Hobbypower simonk 30a esc w/ bec 490mhz Turnigy 30-40c 1000mah 4.s (testing battery) frsky x8r...