Search results

  1. I

    FPV Setup?

    So this has EVERYTHING I need? Will I need ANYTHING else?
  2. I

    FPV Setup?

    Hello everybody. I just recently finished my first build a tweaked out a lot of bugs thanks to you guys on the forums but I had a question about FPV... Could someone recommend a good FPV setup. I have the DJI F450. Just give me a list of everything I will probably need. Thanks, IndianMessi
  3. I

    DJI F450 and Turnigy 9X

    Hi after a fruitful maiden flight I have heard about Gains. I don't know what these are but I do know that they can make a quad fly much more differently. What gains should I use as a beginner?
  4. I

    DJI F450 and Turnigy 9X

    OK thanks!
  5. I

    DJI F450 and Turnigy 9X

    OK, after all this will I need to change any settings in the Naza assistant.
  6. I

    DJI F450 and Turnigy 9X

    Hello everybody and thank you for taking the time to look at this post. I finished my F450 build and I am using a Turnigy 9X. The problem is I have no idea what settings to use or where to connect each servo connector, etc. If this helps I am using a Naza-M Lite FCB. Thanks for your time...
  7. I

    DJI F450 with KK2.1

    Thank you for your response! I will most likely be making the order for the Naza-M Lite soon!
  8. I

    DJI F450 with KK2.1

    But is a Naza-M Lite worth the investment? I heard you could flash a Naza-M Lite with V2 firmware...
  9. I

    DJI F450 with KK2.1

    So what does this BEC do and why do I need it? Sorry for being such a noob. Also someone told me the E300 power system from DJI only works with NAZA... Is this true?
  10. I

    DJI F450 with KK2.1

    My parts are: 15A ESC 2212 920V Motor F450 Frame KK2.1 9443 Prop
  11. I

    DJI F450 with KK2.1

    Which BEC would be the best for the E300 ESC's?
  12. I

    DJI F450 with KK2.1

    Ok, thank you for the response but what is a BEC I hear this all the time but I have no idea what it is....
  13. I

    DJI F450 with KK2.1

    Hey guys, I recently finished my first quadcopter build. I used the F450 frame, the E300 power system and a KK2.1 board. For some reson my KK2.1 board does not get any power... Can someone help? Thanks!
  14. I

    First Build... Don't know what motors or ESC's to get...

    Hey guys this is my first build: Q450 V3 Glass Fiber Quadcopter Frame KK2.1HC Turnigy 9x Reciever Floureon 35C 5200mAh I don't know what motors or ESC's to get... Also I am looking for the best 10in props. It would be best if these items were in stock right now.
  15. I

    First Build... Quad Violently flips over on take off...

    Ok thanks for the help anyway.;)
  16. I

    First Build... Quad Violently flips over on take off...

    I have swapped the flight controller and I think it is only one motor but I have decided to swap all ESC's and motors anyway.
  17. I

    First Build... Quad Violently flips over on take off...

    Yes, I have triple checked every possible thing that could be a variable in this problem and I have come to the conclusion that it is a problem with the motors or ESC's.
  18. I

    First Build... Quad Violently flips over on take off...

    I have flashed my KK2.1 and done everything you guys have recommended but my quad is still flipping over. To be more specific the upper right (red arm orange prop) side goes up and the lower left (white arm black prop) side just stays on the ground. I have done every possible thing and nothing...
  19. I

    Best 10 in props?

    Hey, what do you guys think is the best 10 inch propeller?
  20. I

    Receiver Controlled LEDs

    Thank you for your response. I have the Turnigy 9X. Do I just plug it into an empty channel on my receiver?
Back
Top