Search results

So I did that. Still not receiving any response from using the controller. I also am not receiving any noise or seeing any lights from the receiver. Could it be that the wires are not connected properly?

I did a 180 with the 3 wire cable so, now i have white in the signal and black in the ground. I also have the other 1 wire cables in the signal row, or same row as that white wire. But, the transmitter is still not being received :\ Also I've changed the channel mapping from TAER to AETR. Still...

Ok, in the most abstract way. How do you determine what wire is a signal wire and which wire is a ground wire. I'm guessing a ground wire picks up the current from the battery. But how is that determined?

How can I tell which is the ground and which is the signal? Also where would I check the channel mapping? edit: nvm, the channel mapping is taer1234. How do i check for RX_PARALLEL_PWM in CF?

I'm having a problem connecting the HK-TR6A V2 receiver to the Naze32 board. Everything looks to be soldered correctly. The motors work fine when I test them out on clean flight. I just can't seem to get the controller working. I've developed some pictures for a better view. If you need me to...

^-- link to a video of the problem.

All 4 escs are plugged in. I soldered without the bullets, and I still received the same problem when given throttle to the 4 different motors.

First drone building project. I have the motors and the battery attached to a distribution board. All the escs light up when I plug the battery in. When I test the motors out on clean flight, two motors twitch while the other two motors don't even budge. I'm not to sure what's wrong. I'm almost...