Search results

My earlier questions: 1. First I have to fix the fast blinking green light on the gimbal controller board. 2. Figure out how the remote control knows when I turn the potentiometer “he” has to roll or pitch the gimbal. Where did I told him to use that button? 3. Roll is working with the...

Wow! Great help, I understand what you're saying. Tonight I continue my investigation. I will post the results! Ps: and yes, when I disconnect the extra wire it behaves normal again.

Thanks guys! Yesterday I reconnected the gimbal but calibration isn’t working fine and a green light is fast blinking. I have to push 3 times on gimbal controller button and position the gimbal by hand. So first tonight I have to solve this issue (think I will flash the board (hex file)). A...

Hi guys, I bought a gimbal as mentioned earlier at this forum. This weekend I mounted the gimbal and everything works like expected (see attached images). But if possible I need a little help to push me in the right direction. I would like to tilt (pitch) the camera with my radio transmitter...

Learning!! :)

Thanks, difficult to find on Internet which voltage level is required for this gimbal. But I will test it with the JST pins on the power board (with a 3cell lipo 11.1v) and post the results when possible.

As promised my reaction after I received the programming card. It is very useful and easy to program the ESC’s. Like Jackson above already mentioned, check the factory settings because they probably not suit to your needs. I changed the settings like you see in the above picture. I also think...

Hi all! I will ask my question first here because I payed hard lessons already ;) I bought this power distribution board from HK, works great: http://hobbyking.com/hobbyking/store/__23140__Hobby_King_Quadcopter_Power_Distribution_Board.html Now its time to connect a gimbal to the quadcopter...

PS: another quote from HK: "the plush is most similar to SimonK but has it's own proprietary Plush firmware"

Ok, great. I will wait for the card or learn how to program the ESC using my transmitter. Good to understand both options. In the maintime I will figure out what settings are default applied and what ESC settings are recommended for my situation. My world is IT. Is an ESC like a "PC" where you...

haha.. yes he said just OK. Actually two different engineers from HK said exactly the same. I just ordered the programming card, so I think I have to wait a couple of days. Is there a good question I can ask them? What is your advice? Read the default settings and change these to??? I'm new in...

That's the good thing about sharing Knowledge ;)

Ok, I didn't knew that. When I read your answer I started a quick research. I found the following here: https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=33617 Hello, Can I update this ESC with SIMONK firmware ? What is the MCU inside ? Do you sell the socket to do ? The...

And what about this one: http://www.hobbyking.com/hobbyking/store/__2169__TURNIGY_BESC_Programming_Card.html Familiar with these?

Ok, great. I think I will order one. Not really expensive.

Thank you for your suggestion, I thought I ordered everything now at HK :) but not.. Why do I need the programming card? Because I thought the CC3D software will handle this. Or a misunderstanding on my part?

I’m new in the quadcopter world and have two questions for you guys. Last month I started building and after a couple of days I tested the quadcopter without the propellers and everything went well (including configuring the CC3D and receiver/transmitter and all the wiring). I configured the...