Search results

Awesome, Got that to work, and learned a valued lesson today. Always check your prop nuts to make sure there tight lol

Okay so just to be clear so I dont mess up, take a + lead from the distribution board and attached it to the + side of the red headers and that is it? Any thing I have to change in the setting on the KK? What voltage will the buzzer go off and warn me?

I just checked the batteies i own and just bought. The one ive been using is this one https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=66475 I just bought these as well, another one for this quadcopter and 2 smaller one for a 250 im gona build now...

Its off hobbyking but Im going to get some different ESC's first before I reprogram anything. But about the battery, how long of a flight time roughly should I get with a 5200mah battery? Its a Multistar High Capacity 3S 5200mAh. Also is there a way to have a warning on the radio of something...

How do I turn that braking function off then? cause 2 of them slow down almost instantly and the other 2 dont.

Im not sure what you guys talking about there with brakes on the motors and what not lol Anyways. So I still need to get a video for you guys but yea its flying decent. Im getting about 10 min flight time with a 5200mah battery. That sound about right? Charges to about 11.1v and when it dies...

Believe it or not, I got it to fly somehow! i tweaked with the setting somehow and its flying. Ill go ahead and reflash the KK with the 18s1 so its correct though and report back with how it works Very excited right now though!

(Using version 1.9S1 on KK) My KK wont let me access the "Sensor Max Min" If thats what you are talking about. I have a couple pictures I took of the setting on the KK and one kinda stuck out. It will be attached below. On the menu called "output Sliders" it looks like this shows you how the...

There all sold out right now and out of the country lol Ill have to wait on them. So I've got some info that I need to get some input on. I have successfully got the quad to fly in the air for about 20 seconds before I lose control and land it lol (things aren't as Easy as i thought they were...

Hm very interesting!

Good news, got the quad to fly! I think I found some setting that screwed with it and I tweaked with them a little bit. The stick scaling setting is what I changed The roll was set to 6 and I changed it to 1 and it takes off alot better now. EDIT: Well I may send those ESC's back then and get...

So the ESC's I got are for both planes and heli's? okay for use on quads as well? or no?

Yup https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=70237

i have absolutely no idea....

All good! Anyways, holtneil i went ahead and just decided to order different motors and a new KK board just to rule this out. I ordered 4 of the Turnigy Multistar 3525-850Kv 14Pole Multi-Rotor Outrunner

Could this be something with my wiring on my ESC's to the motors?

Okay, I have to have bad motors. Ive done everything I can to try and get this to work. I redid the calibrating and still nothing. When I turn it on and apply slight throttle to it you can immediately tell that the #1 and #4 motors(both left motors) spin faster than the other 2. When starting...

Sorry i havent been back on here, crashed my computer and had to repair it. Does that mean I have to solder my red wires all back together on the other ESC's? Cause someone told me in another thread that I can cut the red power wires on motor 2,3 and 4 since it uses power from the first ESC.

Still nothing. Hooked the speaker up. No beeping sound from speaker. Just from the #1 motor. Srceen on KK just says "throttle pass through"

Alright, will report back