Search results

So whats a good upgrade radio. Ive been looking at Futaba and Spektrum. I dont have $300 at the moment. Looking somewhere around $150 to $200 How many channels should i go with? My minimal Im looking at is 6ch.

Im thinking about buying this radio just to get upgraded to a newer 2.4Ghz radio. Any thoughts? https://www.spektrumrc.com/Products/Default.aspx?ProdId=SPM2710

futaba Skyport 4

i cant even reload the programming onto the kk cause i have windows 10 and for some reason and cant detect the usb port. Only thing i have changed on the kk is the minimal throttle. I cant calibrate the motors at all. When i follow the youtube video on how to do it my setup does nothing like in...

Well ive tried to do pretty much anything to get this quad to fly stable. It always wanted to take off in a different direction, never straight up

So i don't know if its the FC board I'm using or the motors but i cant get my quad to fly straight or go up straight or anything. I'm constantly having to change the settings on my remote to get it to fly straight but then when I try to take off again I have to adjust the setting again. So im...

I just upgraded to windows 10 so Im wondering if that is the issue....

So Im trying to reflash this dang KK FC and im getting an error now. "C:\Users\NICHOLAS\My Programs\Quadcopter\kkmulticopterflashtool_0.77\lib\avrdude\windows\avrdude.exe -C C:\Users\NICHOLAS\My Programs\Quadcopter\kkmulticopterflashtool_0.77\lib\avrdude\windows\avrdude.conf -p m644p -P usb -c...

Sorry about that. Try it now

I've tried to calibrate my motors maaaaany different times and it is still not working properly. The video I am posting on here is showing the flight after attempting to calibrate the ESC again. You can see that the quad only likes to take off on one side. Also when I turn the throttle down...

You think that will correct the calibrating?

So I am suppose to remove the red wire from the other 3 motors? except for motor 1?

Ive done the calibrating about 4 times

Will the 72 hz still work though? If it will work for now until I get the hang of flying it, id rather do that and then look at upgrades later. I did find that somewhere about increases the minimal throttle. And that did work! just not all the way. It seems the quad wants to fly more t the fly...

How do I get this thing to hover properly? I have all the motors almost synced together. I tried syncing the motors together with a youtube video someone pointed to me too, which that didnt work at all. Then I read somewhere online about turning up the idle. So I turned it up and it almost...

The only props that I have found to fit are these ones http://www.ebay.com/itm/290924438866?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT they are a carbon fiber 8mm DJI prop The whole programming this KK FC is a pain in the ass though I cant get the quadcopter to idle properly...

That didnt work. All it did was start motor #2 and #4 first, then #1 started and then #3 started. Basically just changed the pattern of which ones start first

Okay I got the throttle to work properly. The throttle stick is controlling the right thing now. Issue I am having now is that when I apply the throttle very slowly only the #! motor starts and once i give it a little more the #2 motor and then the last 2 motors came on.

The servo wires are backwarrds arent they

Actually confused bout that. The throttle is working for the right thumb stick which is dspring loaded. The left stick seems to control whick way it goes