Search results

Ok, So I live in the united states. All the frequencies are fine but I have to restrict the wattage? Im running a 600mw transmitter. Is that fine??? Thanks!

One question. What 5.8Ghz frequencies are legal in the US? Is 5800 legal? I can' find it anywhere. Thanks!

I am going to try the larger props. Just wondering what kind of multirotor are you rocking these days? Last question, I heard that some people have blown ESC's using large props like 10x4.5. Will I be fine with my setup? Thanks!!!

I had gotten the new ARF kit so no nuts were supplied. DO you honestly think the larger props will provide enough lift where as the quad won't be sluggish and will be able to perform at high altitudes? I put a picture down below of the motors just to confirm they are compatible with those nuts...

I understand, do you run a gimbal and fpv on your f450? If so would you mind sending some pics of it? Also, do I need any locking nuts to go with those props you gave me a link to? Thanks.

Dji F450

Awesome! So If I bought two sets of the cheaper pair (The First Link) they wouldn't be to large for my quad? Also, Do I need to buy some kind of locking nut for the props? Will these really make that much of a difference? Thanks!

Well, I think What I need to do is get the simple landing gear and jerry rig the rest of the stuff on to it. I have the DJI 2212 Black Brushless Motors for self tightening props. I am going to still do the landing gear thing but better props would be great if u can recommend some for those...

Ok, Well i think I answered my own question... after spending about 4 hours rigging everything up I come to the conclusion that it can't reach more than 20 feet in he air with the extra weight. I don't know what to do. Any suggestions?

Hi, Once again thanks for all this help. One more thing. I got all the camera gear and mounted everything today. I weighed it and I am about 195 grams over the limit. Takeoff weight should be around 800-1600grams and I am at about 1795grams. Will I be ok? I don't want to stress any parts. Here...

Hey, I got my gimbal a while ago and realized I ran out of Female JSTs. I bought some and they happen to be 22AWG while the wire coming off the gimbal is 20AWG. Is it ok if I solder the 22AWG on to the gimbal in order to power it? Will I have any problem? Thanks!

Ok, If I do the soldering way with the loom will I have any problems? Do I have to check amps if I do it that way? Also, this cord http://www.helipal.com/splitter-cable-3s-li-po-plug-to-jst-plug-1m2f.html says it is for transmitters and small electronics would this work fine?

Ok, but how do I make sure I don't over power it?

Ok, I am not sure what I am looking for so here is the manual link. Also, So if I decide not to solder the JST plan will work just fine? THANKS!!!

Ok, I can solder it if I have to. I still have some questions though. So if I plug the camera into the transmitter then plug the JST into the transmitter for power but I do not directly put any power source into the camera will I have a problem if the camera cannot handle 12v? Also, just want to...

Ok, I think I understand what you are saying. I have one question though. I realize your way would be the cleanest way of doing this although I am not so great with the soldering iron plus the battery and everything is already soldered in. Would it work just the same if I used the plug I linked...

This is what I figured. The monitor has built in diviersity receivers and a built in battery. We got the 5200Mah battery so we could power everything off of it. The only things we need to power are the gimbal and transmitter. I am using my action cam as the fpv cam so it has its own battery...

One more question. Can I use the fpv hub with my f450. I have a naza. Also, how does the whole thing get power? Lastly, since I am getting a tarot I do not believe it will work with the gimbal input on the fpv hub. Where do I plug the gimbal into? Thanks!

I never told you but I ended up canceling the order for that fpv gear. I have been flying a while now and decided to go ahead and buy the fpv gear I need. I have already purchased the Tarot 2D gimbal. I have some questions about the rest of what I need. This is what I am planning on buying...

I have got it built and ready to test for first flight. I have looked into flashing the naza lite because Im interested in the waypoints. Is it safe to flash as log as I follow all instructions? Thanks!