hrllo i have a octocopter with a very strange battery charge and balance connector setup.
any help in how i can find them or build my own to use on my standard balance charger.
not sure if the balance is a thunderpower lead attached to a pcb for the flight controller to analyse the cells during flight possibly on the other 4 pinout on the connector as its an 8 block pinout balance connector for a 3s battery?
if unavailable to buy just wondering how best and easiest to build a DIY lead connector for the charge and balance side. (i cant cut the cables and attach standard ones, as the drone requires these 2 special connectors to operate)
tried google reverse image lookup but nothing showed up...
any help is massively appreciated
any help in how i can find them or build my own to use on my standard balance charger.
not sure if the balance is a thunderpower lead attached to a pcb for the flight controller to analyse the cells during flight possibly on the other 4 pinout on the connector as its an 8 block pinout balance connector for a 3s battery?
if unavailable to buy just wondering how best and easiest to build a DIY lead connector for the charge and balance side. (i cant cut the cables and attach standard ones, as the drone requires these 2 special connectors to operate)
tried google reverse image lookup but nothing showed up...
any help is massively appreciated
Attachments
-
IMG_20221025_105121.jpg478.5 KB · Views: 3
-
IMG_20221025_104037.jpg463.9 KB · Views: 2
-
IMG_20221025_105142.jpg472.8 KB · Views: 2
-
IMG_20221025_105221.jpg463.3 KB · Views: 1
-
IMG_20221025_105258.jpg485.6 KB · Views: 2
-
IMG_20221025_105324.jpg447.5 KB · Views: 2
-
IMG_20221025_105341.jpg471.6 KB · Views: 3
-
IMG_20221025_105356.jpg460.8 KB · Views: 3