Search results

Thanks holtniel, I am using a spectrum receiver, in my home built Quanum venture. I will give your advice a go when I get a chance. Thanks for your help. Regards Martin.

Hello holtniel, Its me again a complete beginner on mk2. I have the motors set in between recommended and slow. Do I have to bind the rx with the tx every time I turn it on then. I have no props on yet just installed the naza m light just to try it out so no green lights as yet. Regards Martin.

Ive bought a naza m light of ebay, I know, I know, its been upgraded to v2. The trouble im having is, after down loading the v2 assistant and hook up my quad and calibrate the sticks turn of the program, un hook, and the motors work from the tx, then disconnect the battery and turn of the tx...

Thanks ringolong, I'll try and post a video later, but I have since changed the motors with a different prop mount rather than the self tightening ones, and its a lot better not perfect, but better. Regards Martin.

Hello all, I have just finished my first build, a hobby king dart 400 with naza m light fc, as it was my first time I hadn't a clue on how it worked, but a few questions on this great forum got me going. It flys ok but it has a bit of vibration even after balancing the props, and it struggles a...

Hello all, Well it flies:) took it steady, it did seem to have a bit of wobble as I took of, I didn't want to increase the fevs any more as being a complete newbie and being on concrete. Are self tightening props balanced? if not how do you do it with the fixed spinners on? Regards Martin.

Hi holtneil, Yes thanks, I have noticed the blue blocks moving on my gear 3 position switch, dont know what they mean yet until I read up on it. What I did notice last night when i armed the motors that I had no throttle response plus the red light flashing rapid on the naza led (low battery)...

Hi holtneil, Don't ask me what I done but I have motors turning, no props on yet I still have settings to do if I can figure out all the switches and what does what on my DX7s, but im getting there slowly. Cheers Martin.

Hi holtneil, Still have no motors turning, but at least got into naza assist now and sliders are responding how they should to the transmitter. I uninstalled my internet security, and reinstalled a windows one :p. I did try to arm the motors but run out of time this evening so ill try again...

Hi holtneil, Im so sorry for being a pain in the !!!!!!! but me and computers just dont get on a complete technophobe im affraid, I can put things together and take thing s appart but computers, hopeless:( Anyway my computer is Dell inspiron, and the opperating system is windows 7 home primeium...

Hi holtneil, wasted all day today trying to figure out how to get naza m light to work, switching on, and wiring options, uninstalled and re installed dji naza m light assist three or four times. The assist just does not seem to run properly I get to the channel monitor section for the thro...

Hi holtneil, Thanks mate I'll try that I didn't realize that it all had to be hooked up to the computer. I Will try it all out tonight or tomorrow. Thanks for all your help. Cheers Martin.

Hi Samuel, Yes it does look very nice, don't know about prices yet, but I've decided to try and build one, and I mean try:mad:

Hi holtneil, As I said a complete newbie, downloaded the link you gave me and I cant sign in, just wont highlight register to continue. Im beginning to think this build your own isn't as simple as I first thought, just solder a couple of wires here and there, plug in and away you go, its not...

Hi holtneil, I'm sorry but I should have been a clearer, it is a Naza m light. Cheers Martin.

Hi holtneil, Thanks for the info I'll try that later on. Cheers Martin

Hi holtneil, All the wires elevator, rudder, throttle, etc are in place on the Naza when I bind the transmitter to the receiver, but if the other wires are in the right place I don't know I just followed the video on YouTube. How do I go obout getting into the software of the naza, I'm sorry...

I am doing something wrong, I'm a complete beginner I bind the radio gear DX7s plug battery in the Naza m light all lights up, try to arm motors and nothing:(. I have 20amp Africa esc s with BEC they have green lights on the pcball are lit appart from number 4. Should the red wire be cut? Please...

Thanks guys that was a great help, but I have another question. Where do I pick up the power for the receiver, which I am waiting for delivery on a nearly new Spektrum DX7s system, would it come of one of the esc? if so where from. Sorry for all the questions, but I am a complete beginner, and...

Hello all, Can somebody help me, im confused, using the motors recommended for my first quad build HK Dart 400 the tread on the shafts of all 4 motors are the same direction. I understand that 2 run ccw and 2 run cw, but wont the props undo on 2 of the motors, or am I missing...